ULP sensor read-out ASIC with ISO15693 compliant NFC
This ASIC is part of a battery powered wearable device. It has an on-chip ISO15693 compliant NFC to power the device externally and communicate with a standard NFC reader. The sensor readout contains an ultra-low-power front-end. A custom digital sequencer is implemented to optimise device power consumption. Features
Readout ASIC for IR imaging detectors and cameras
Gated Imaging systems use a gated imaging sensor and a VCSEL (Vertical-Cavity Surface-Emitting Laser) to generate a clear image and to generate range maps. This readout ASIC is connected with the IR (InfraRed) image detector using flip-chip technology. Features
Time-of-Flight level measurement ASIC for automotive
High-voltage automotive qualified ASIC for the detection of fluid levels in a car (oil level, fuel level, …). The readout is based on US (UltraSound) transducers combined with a time-of-flight detection principle. The transducer elements require high-voltage drivers that are monolithically integrated on the ASIC. Features
Time-Of-Flight receiver channel ASIC with 10psec resolution
This ASIC is part of safety and surveillance systems, ADAS (Advanced driver-assistance systems) and gesture recognition applications. It uses a laser-pulsed oF (Time-of-Flight) detection principle to calculate the distance to objects using a state-of-the-art 16-bit resolution TDC (Time-to-Digital Convertor). The design is tailored towards functional safety SIL-2. Features
Generic stimulation/recording ASIC for implants
Discover our generic stimulation/recording ASIC for implantable devices, engineered to support advanced neuromodulation applications including nerve stimulation, spinal cord stimulation, and Deep Brain Stimulation (DBS)—enabling flexible, high-performance interfacing with the nervous system. FEATURES
TMR angle sensor ASIC with 0.2deg angle accuracy
A TMR angle sensor interface ASIC for in-vehicle applications with dynamic compensation for offset, gain and distortion errors to achieve very high angle accuracy performance. The SiP sensor module is connected directly (no PCB) to the automotive wiring harness. This ASIC has an auto-calibration sequence that allows to compensate for non-idealities introduced by the magnet […]
“True 0-Hz” wheel speed sensor ASIC
The ASIC interfaces with 3 half-bridge TMR (Tunnel Magneto Resistance) sensors to monitor the speed of a rotating magnetized subject, commonly used in automotive safety critical applications like ABS (see picture), electronic parking breaks or hill-hold control. The design supports True 0-Hz (standstill) functionality upto 20kHz. Automotive compliance is guaranteed through careful EMC/ESD aware design […]
Magnetic sensor interface ASIC
The magnetic sensor ASIC is used in different automotive applications. Non-idealities are compensated by on-board custom DSPs. All ASICs comply with ISO26262 ASIL B. Key Features: Readout channels including AAF and 15-bit Delta-Sigma ADCs Functional safety ISO26262 ASIL B ESD (ISO10605) and EMC (ISO11452, ISO7637, CISPR25) UVW, ABZ, PWM and SENT outputs 0.18u BCD
Industrial transceiver ASIC for factory automation
The mixed-signal ASIC is used for wired industrial communication and embeds a high-precision TX/RX front-end and ARM Cortex M3 processor. It contains a fieldbus standard focusing on safety relevant industrial systems. The communication ASIC is commonly used as part of a sensor network area in a typical factory automation environment. Information and energy is transferred on […]
Fully integrated temperature sensors
ICsense has developed several integrated temperature sensors for different temperature ranges and accuracies for industrial and automotive markets. These sensors have a digital output that can for example be used for on-chip temperature compensation. We have extensive knowledge to port these designs to different technologies and specifications. Features